Rotary Dial Laser Marking Workstation
3806 Series
FiberStar Rotary Dial Laser Marking Workstation
The FiberStar Rotary Dial Laser Marking Workstation is a robust, turnkey industrial laser marking platform that offers the benefits of a non-contact, abrasion-resistant, permanent laser mark, laser engraving, or cut onto almost any type of material. These systems offer the speed, reliability and flexibility required to meet stringent quality control and process certification standards.
FiberStar Laser Marking Systems integrate the FiberStar laser marking source and provide controllable pulse rates that can be adjusted from continuous wave to single pulse for deep laser marking, cutting, or fast throughput thermal mark applications at up to 200 characters per second.
The FiberStar Rotary Dial Laser Marking System is a high volume production workstation that is ideal for a wide range of applications. The system is designed to allow an operator to rapidly load/unload components, “quick release” load/unload of preloaded fixtures, or single component marking in the manual mode. Advanced integrated motion for step-and-repeat laser marking, or coordinated rotary motion for seamlessly laser marking around a circumference is also possible. Operators can trigger the cycle using the dual trigger switches or a foot pedal. A safety light curtain option is also available. LaserStar’s laser marking operating software provides complete coordination of all integrated system components.
As a turnkey solution provider, LaserStar’s Applications Specialists will evaluate your laser marking or laser engraving requirements, define the application goals and objectives, specify and verify the correct laser marking platform, and define a complete laser marking system configuration to accomplish the desired results.
- Solar & Semiconductor
- Bio Sensor Production
- Thin Film Polymers
- General Marking & Engraving Automotive (Parts and Displays)
- ID Cards & Mobile Phones
- Jewelry Laser Engraving & Cutting
- Medical Devices & Implants
- Electronics & Sensors/Instruments Industrial Components
- Manufacture of Processed Parts
| System Specifications | Request an Engineering Packet |
| Laser Type | MOPA Pulse Fiber Laser |
| Platform | Class 1 / Closed |
| Wavelength | 1064 nm (Nominal) |
| Output Power | 20 - 100 Watts |
| Pulse Energy (milli-Joules) | 20W/30W = .9mJ | 60W/80W = 1.5mJ | 100W = 2mJ |
| Frequency Range | Up to 4000kHz |
| Cooling System | Air Cooled |
| Scanhead | Model Dependent |
| F-Theta Focus Optics | 100mm, 163mm, 254mm1 |
| Marking Field Size | Based on F-Theta Lens |
| Z-Axis (13" of travel) | Motorized / Programmable |
| X-Axis (Programmable Linear) | Optional - Multiple Sizes |
| X-Y-Flat Tables (Programmable) | Optional - Model Dependent |
| Rotary Device (Programmable) | Optional -Multiple Styles |
| VisionFX® Camera System | Optional -Multiple Styles |
| TraceFX® Red Alignment Laser | Standard |
| Software Options (select one) | StarFX Premier® Design Studio | EZCad2 Software |
| Supply Circuit | 120 - 230V ( /- 10%), 16A, 50/60Hz |
| Laser Safety Compliance | FDA (CDRH), CSA, CE |
| Country of Origin | Designed, Engineered & Built USA |
| Warranty | As Quoted |
Additional Focal Length Lenses available upon request.
Note: In the interest of technical progress, we reserve the right to make technical changes without notice.
